Home Improvement Archive

Most busy professionals carry their lives around with them in a PDA or planner. If not for these handy tools, we’d forget about meetings, never return phone calls, and overlook birthdays. However, one huge part of our lives is usually neglected: keeping the house clean.

Housecleaning is cyclical, which means that you do the same tasks repeatedly, in a daily or weekly cycle. Once you learn to plan how and when the cycles take place, you can find yourself automatically restoring order to your house on a regular basis. To get started, buy a new planner specifically for this purpose. It doesn’t have to be fancy, but you may find yourself more excited to use it if the design is appealing.

1. Identify Cyclical Tasks

Think about what tasks need to be done regularly in your household. Make a list of daily chores, such as making beds, washing dishes, and sweeping floors. Try to keep the list to about four or five tasks. Then create a list of weekly chores, such as grocery shopping, laundry, and paying bills. Do not focus on long-term projects such as organizing photos or getting rid of clutter. Instead, try to stick with chores that will keep your house sanitary and replenish the items you use regularly, such as laundry and dishes. Keep these lists handy, either in the notes section of your planner or in a front pocket.

2. Create Daily To-Do List

Find the current week in your planner. For each day, write down the daily chores from your list. Decide how to incorporate your weekly chores as well, keeping in mind that not all weekly tasks must be done on the same day, or just on weekends. For example, you may decide to do laundry on Wednesdays and Saturdays, or mop the floors on Thursday afternoons. Realize that your schedule will be flexible, and if you find that a certain day isn’t working well for you, just rotate the task to a different day next week.

3. Check Your List Daily

Check over your list each day, perhaps while you’re eating breakfast or sitting in traffic. Mark off tasks as you do them, and re-arrange the plan as necessary. If you end up working late and you’re too tired to mop the floors, just move the task to the next day and concentrate on the bare essentials. Using your to-do list will give you a sense of accomplishment, and will also help you know when to stop. Although it’s commonly said that housework is never done, having a defined list will give you a sense of completion and make the system seem manageable.

4. Expand Your Planner

Within a few weeks, you will notice how much more comfortable your house feels. At this point, you can begin to expand your planner to incorporate monthly or quarterly cleaning tasks such as changing air filters, cleaning out closets, and so on. It is important not to overwhelm yourself until you are fully comfortable with your daily and weekly routines. You can also use your planner for meal planning and creating grocery lists, as well as for keeping bill-paying schedules.

However you make use of your housekeeping planner, be creative and give yourself a pat on the back for taking control of your house. If a person does not have time to clean the house, then hiring of the агенция софия домоуправител will be beneficial for them. The information about the charges can be collected from the agency. The qualifications of the person will be excellent to keep the house neat and clean.

Replacing a bathroom vanity or sink is easily accomplished in a couple of hours or less. Yet in that short period of time you can help update your bathroom and give it a whole new look.

Measure your old vanity before you go shopping. It will make life much simpler if you replace your old vanity with one of the same size. If you are determine to try for a larger vanity, be sure to measure the total area available for a vanity. Keep in mind that you may have to cut baseboards to allow for a larger vanity.

Once you have your new vanity, begin your project by cutting off the water supply to the sink. Hopefully you have cut off valves underneath the sink top. If not, now might be a good time to install those because you will probably have to turn the main water supply off.

Once the water is turned off, open the faucet up and allow any excess water to drain out. Now you need to remove the faucet. Begin by disconnecting the water supply lines underneath the sink. The easiest way to do this is to remove the flexible line that connects the faucet to the the pvc or copper water line completely. You will have to loosen the connection just below the faucet and also where it connects to the main water line. Once that is removed, unscrew the large plastic or metal washers or locknuts holding the faucet to the sink. These can usually be removed by hand. If not, carefully use a set of pliers to loosen them.

The faucet should now easily come off. If the plastic gasket did not come off with the faucet, use a flat screwdriver to carefully pry it up. If you are reusing your faucet, you will need to clean this gasket before re-installing it.

Now remove the drain line. Near the curve in the drain should be a large plastic washer or locknut. This should also turn by hand. Unscrew the drain. Your sink top should be disconnected. However, before attempting to lift it off the vanity, check to make sure no caulking has been applied between the sink back and the wall. If there is caulking, cut it with a utility knife.

Remove the sink top. Check the vanity for screws securing it to the wall. Remove any screws found. Check around the bottom of the vanity for any caulking or trim. Remove any if found. The vanity should now be free.

Carefully lift it up and over the water lines and drain lines. You may need an extra set of hands to do this. Set it out of the way. You’re now ready to install your new vanity.

Before you go any further, check your water lines and drain lines. Do they come up through the floor or come out of the wall? If they come out of the wall, you’re probably ready to install the vanity. If they come up out of the floor, you will need to cut an opening in the bottom of the vanity to allow the drain and water lines to come up into the vanity.

Measure carefully and cut out an opening for the lines. If the vanity is very large you may need help lifting it up and down over the lines carefully. Once it is in the correct position, use a level and ensure that it is level. If it is not, use small wedges to get it level. Secure it to the wall using screws. Be sure to attach it to at least one or two studs.

Install your faucet on the sink top before placing it on the vanity. Be sure to use a new gasket or clean the old one thoroughly. Use a thin bead of plumber’s putty around the gasket. Tighten the large plastic washers or locknuts underneath the sink top. Hand tight is usually good. Connect one end of the flexible water supply lines to the threaded ends of the faucet. Be sure to apply teflon tape to the threads on the bottom of the faucet. Use a wrench to tighten, but do not over tighten.

Place the sink top on the vanity. Ensure it it seated correctly. Reconnect your water supply lines to the main supply lines.

You are now ready to install the drain assembly. Using plumber’s putty, apply a thin coat around the opening in the bottom of the sink. Insert the drain assembly through the opening, pressing it down into the plumber’s putty. Be sure to align the opening in the drain assembly for the overfill with the opening in the lip of the sink. The tailpiece of the drain assembly should fit into the drain line. Hand tighten it with the locknut.

Check any other locknuts on the drain to ensure they are tight. Turn your water back on and check for any leaks. Your new vanity is now ready for use. A visit at the compareboilerquotes.co.uk can be made through the person. A warranty card should be furnished through the person for the purchase of the product. Proper checking should be there of the leakages available in the boiler for the boiling of water in the kitchen. 

In order to keep the family safe from electrician shocks then user must hire a certified and reputed electrician who will able to keep system safe and secure. Hiring a genuine electrician can be daunting for newbie because user needs to invest a lot of time in the research. All you need to opt for a electrical engineer who will able to offer top-notch quality services. There are a lot of electricians are out there that are specified in the residential, new buildings and business as well. In order to repair essential cables, board and other things then one should consider certified electrician. Make sure that you aren’t hiring a beginner electrician. 

One should invest a lot of time in the research and check the reviews and references as well. Let’s discuss some considerations that one must take into the account while selecting the electrician.

• Insurance and License

Before choosing any electrician, you should pay close attention on two important things like insurance and license. All you need to opt for a fully licensed electrician who will improve the quality of the system and will keep the system away from the energy shocks.  Make sure that you aren’t hiring non-licensed electrician because they will damage the electrician system. All you need to visit www.speedyelectrical.com.au where user will able to hire the electrician of choice.

• Level of experience

Try to choose electrician with significant amount of experience.  One has to always choose a electrician with significant amount of knowledge and experience as well. Electric work can be dangerous sometime so user should opt for the best one that can offer the top-notch quality services.

Wrap up

Finally, all you need to choose a local electrician who will able to offer high-end quality services at nominal worth.